Grommet Sling

●In the form, grommet sling was spliced by the wire rope with the characters of class b or ab, fiber core, nominal tensile strength 1670MPa.
●Depending on the different working place, we should chose the rope with different surface treated, including galvanized wire rope with lubrication, galvanized wire rope without lubrication and un-galvanized, total three choices.
●Choose different capability wire rope to splice the grommet sling, its breaking load is different. Shall calculate the sling’s breaking strength according to the steel wire rope construction.
●Min Breaking load of grommet sling is 5 times of that working load. According to the requirements of the industry, other safety factors also can be applied. The safety factory of the following operation can be executed with the standard GB/T30587-2014, such as the load weight is accurate calculated or measured, hoist operation is to be monitored and controlled and dynamic coefficient are limited. The same, when the diameter is 60mm or less than, take the safe factor of 5, the diameter from 60 to 150 mm take the safety factor of(6.31-0.022D), when the diameter is greater than 150 mm, safety factor should not be less than 3.
●Special for limited space lifting, the shortest sling circumference should be 50 times of sling diameter.
●The min. bend radius of the lifting point area should not be less than 1.5 Dia.
●The angle in the form is the diagonal angle.

ITEM No.	Min. Breaking Load	Single Leg Working Load	Double Legs Working Load (kN)		Weight
	kN	kN	0~90°	90~120°	kg/m
WJT15	125	25	45	35	0.67
WJT18	181	36	65	51	0.97
WJT21	246	49	88	69	1.33
WJT24	321	64	116	90	1.72
WJT27	407	81	147	114	2.18
WJT30	503	101	181	141	2.7
WJT33	608	122	219	170	3.27
WJT36	723	145	260	202	3.88
WJT39	850	170	306	238	4.56
WJT42	985	197	355	276	5.29
WJT48	1285	257	463	360	6.91
WJT54	1632	326	588	457	8.73
WJT60	2009	402	723	563	10.76
WJT66	2428	486	874	680	13.02
WJT72	2897	579	1043	811	15.52
WJT78	3397	679	1223	951	18.25
WJT84	3937	787	1417	1102	21.13
WJT90	4519	904	1627	1265	24.25
WJT96	5141	1028	1851	1439	27.6
WJT102	5814	1163	2093	1628	31.19
WJT108	6508	1302	2343	1822	34.94
WJT114	7252	1450	2611	2031	38.99
WJT120	8038	1608	2894	2251	43.2
WJT126	8864	1773	3191	2482	47.57
WJT132	9731	1946	3503	2725	52.25
WJT138	10608	2122	3819	2970	57.08
WJT144	11628	2326	4186	3256	62.15
WJT150	12546	2509	4517	3513	67.45
WJT156	13566	2713	4884	3798	72.99
WJT162	14688	2938	5288	4113	78.76
WJT168	15708	3142	5655	4398	85
WJT174	16932	3386	6096	4741	90.46
WJT180	18054	3611	6499	5055	97.48
WJT186	18564	3713	6683	5198	108.39
WJT192	19788	3958	7124	5541	115.41
WJT198	21012	4202	7564	5883	122.43
WJT204	22338	4468	8042	6255	130.23
WJT210	23664	4733	8519	6626	138.02
WJT216	24990	4998	8996	6997	145.82
WJT222	26418	5284	9510	7397	154.4
WJT228	27846	5569	10025	7797	162.98
WJT234	29376	5875	10575	8225	171.56
WJT240	30804	6161	11089	8625	180.13

High Tension Grommet Sling

●Compared with the normal grommet sling, the breaking load of the high performance sling is much bigger and special process is done at the lifting point to extend its service life
●In the form, high tension grommet sling was spliced by the wire rope with the characters of class a or ab, steel core, nominal tensile strength 1770MPa.
●Depending on the different working place, we should chose the rope with different surface treated, including galvanized wire rope with lubrication, galvanized wire rope without lubrication and un-galvanized, total three choices.
●Choose different capability wire rope to splice the high tension grommet sling, its breaking load is different. Shall calculate the sling’s breaking strength according to the steel wire rope construction.
●Min Breaking load of high tension grommet sling is 5 times of that working load. According to the requirements of the industry, other safety factors also can be applied. The safety factory of the following operation can be executed with the standard rope sling –grommet sling> GB/T30587-2014, such as the load weight is accurate calculated or measured, hoist operation is to be monitored and controlled and dynamic coefficient are limited. The same, when the diameter is 60mm or less than, take the safe factor of 5, the diameter from 60 to 150 mm take the safety factor of(6.31-0.022D), when the diameter is greater than 150 mm, safety factor should not be less than 3.
●Special for limited space lifting, the shortest sling circumference should be 50 times of sling diameter.
●The min. bend radius of the lifting point area should not be less than 1.5 Dia.
●When using much higher tensile strength wire rope to splice the grommet sling, the rope diameter should be smaller than the normal tension strength rope.
●The angle in the form is the diagonal angle.

ITEM No.	Diameter	Min. Breaking Load	Single Leg Working Load	Double Legs Working Load (kN)		Weight
	mm	kN	(kN)	0~90°	90~120°	kg/m
GJT48	48	1642	328	590	459	8.56
GJT54	54	2080	416	748	582	10.8
GJT60	60	2570	514	925	719	13.36
GJT66	66	3111	622	1120	871	16.65
GJT72	72	3702	740	1333	1037	19.81
GJT78	78	4345	869	1564	1217	23.26
GJT84	84	5039	1008	1814	1411	26.97
GJT96	96	6581	1316	2369	1843	35.22
GJT108	108	8330	1666	2999	2332	44.58
GJT120	120	10284	2057	3702	2880	55.03
GJT132	132	12443	2489	4479	3484	66.59
GJT144	144	14808	2962	5331	4146	79.25
GJT156	156	17379	3476	6256	4866	93.01
GJT168	168	20156	4031	7256	5644	107.87
GJT180	180	23138	4628	8330	6479	123.83
GJT192	192	26326	5265	9477	7371	140.89
GJT198	198	27997	5599	10079	7839	149.84
GJT204	204	29719	5944	10699	8321	159.05
GJT210	210	31493	6299	11337	8818	168.55
GJT216	216	32383	6477	11658	9067	177.04
GJT222	222	34207	6841	12315	9578	187.01
GJT228	228	36081	7216	12989	10103	197.25
GJT234	234	38005	7601	13682	10641	207.77
GJT240	240	39979	7996	14392	11194	218.57
GJT246	246	42020	8400	15125	11765	241
GJT252	252	44060	8810	15860	12335	254
GJT258	258	46205	9240	16630	12935	265
GJT264	264	48345	9665	17405	13535	280
GJT270	270	50590	10115	18210	14165	291
GJT276	276	52835	10565	19020	14790	304
GJT282	282	55180	11035	19865	15450	318
GJT288	288	57525	11505	20710	16105	332
GJT 294	294	59975	11995	21590	16790	345
GJT 300	300	62420	12480	22470	17475	359
GJT 306	306	64970	12990	23390	18190	374
GJT312	312	67520	13500	24305	18905	388
GJT318	318	70175	14035	25260	19645	403
GJT324	324	72825	14565	26215	20390	419

Endless Wire Rope Sling Eye&Eye TYPE

●Under 60 mm diameter of wire rope，It can be machined into eye & eye type Endless wire rope sling with Wire Rope Thimble.
●Wire Rope Thimble,according to GB/T 5974.1-2006.
●It has higher strength than spliced and pressed wire rope sling.
●Softer than spliced and pressed wire rope sling.
●Customizing the length according to the customer's requirements.